• Table of contents
• Server Options
  • Server
  • Use new Serverlist
  • Reconnect on server disconnect
  • Reconnect on resume from sleep
  • Save open servers on exit and autoconnect them on next restart
  • Use echo-message when available
  • Retry [X] times
  • Wait [X] seconds before retrying
  • Default ban type
  • Default Part Message
  • Default Quit message
  • Default Port
  • Use random quit message
  • Default Encoding
  • Use UTF8 Fallback
  • Try to regain nick
  • Use serverlist group labels as network name
  • Track users away status
  • Only track away on channels smaller than [X] users
  • Send delay [X] ms
  • Identd
  • Use Identd
  • Enable only when connecting
  • Show Identd requests
  • Ident Nick
  • System
  • Ident Port
• Dde
  • Enable Dde Server
  • Check if Service Name is in use
  • Service Name
  • Dde Delay [X] ms
• Upnp
  • Ip address
  • DCC Connections
  • Identd server
  • Skip connections with invalid certificates
  • Display invalid certificates for approval
• Certificates
  • Automatically accept invalid certificates
  • Clear approved certificate cache
  • Client Certificate File

Server Options¶

Server¶

Use new Serverlist¶

Enables or disables the new serverlist.

Old and new serverlist can still be accessed with the /serverlist command.

Reconnect on server disconnect¶

if enabled, AdiIRC will try reconnect when remote connection is disconnected.

Reconnect on resume from sleep¶

If enabled, AdiIRC will when resuming from sleep, try to reconnect all servers which was previously connected when going to sleep.

Save open servers on exit and autoconnect them on next restart¶

If enabled, AdiIRC will on exit save all open servers in the serverlist and mark them for autuconnect on next startup.

All other servers in the serverlist will be unmarked for autoconnect.

All autojoin channels for the open servers will be cleared and all open channels will be added as autojoin in their place.

Use echo-message when available¶

If enabled, AdiIRC will ask to enable ircv3 echo-message tag on supported servers, outgoing messages will be hidden so only the echo'ed message is shown.

Retry [X] times¶

Number of times to try to reconnect.

Wait [X] seconds before retrying¶

Number of seconds to wait between each reconnect try.

Default ban type¶

Default ban type to use when using /ban.

Default Part Message¶

Default part message to use when using /part or closing a channel window.

Default Quit message¶

Default quit message to use when using /quit or disconnecting/closing a server window.

Default quit message will be ignored if random quit message is enabled.

Default Port¶

Default port used in /server and other places.

+port can be used for SSL, *port can be used for STARTTLS.

Use random quit message¶

If enabled, a random line from the quit messages file will be used.

Quit message can be added/removed from the Menubar -> Tools -> Edit Quits.

Default quit message will be ignored.

Default Encoding¶

Default character encoding to use when adding/connecting a new server.

Use UTF8 Fallback¶

If enabled and encoding is not UTF8, AdiIRC will try to decode the text with the chosen encoding and if it fails, fallback to decode with UTF8 instead.

Try to regain nick¶

If enabled, AdiIRC will automatically try to regain your primary nick.

Use serverlist group labels as network name¶

If enabled, the serverlist label you entered will be shown in Treebar/Switchbar/Titlebar etc instead of the network name received from the server.

Track users away status¶

If enabled, AdiIRC will periodically try to find out which users are away or not away.

Only track away on channels smaller than [X] users¶

Disable tracking away status for channels larger than [X] users.

On some servers, AdiIRC needs to send /who #channel periodically, doing this on large channels can cause the server to disconnect you.

Send delay [X] ms¶

Set the delay in milliseconds between each message AdiIRC sends to the server.

Sending too much data too fast can cause the server to disconnect you.

Identd¶

Use Identd¶

Enable or disable the Identd server.

Enable only when connecting¶

If enabled, AdiIRC will start the identd server when connecting to a server, and stop it when connected.

Show Identd requests¶

If enables, shows a notice in the server window when a server wants to know your Identd nick.

Ident Nick¶

The nick to reply when a server asks for your Identd nick.

System¶

The system to reply when a servers asks for your Identd nick.

Ident Port¶

The port the Identd server should listen on.

Dde¶

Enable Dde Server¶

Enables or disables the Dde Server.

Check if Service Name is in use¶

If enables, AdiIRC will check if another Dde server is using the same name before starting it.

Service Name¶

The Dde service name to use.

Dde Delay [X] ms¶

How long to wait in milliseconds before giving up the Dde request.

Upnp¶

Ip address¶

If checked, opens the port specified in the /socklisten -p command using Upnp.

DCC Connections¶

If checked, opens the port associated DCC port using Upnp when sending files.

Identd server¶

If checked, opens the identd port using Upnp.

Some servers scans for open identd port and can take a while to timeout, with the port open AdiIRC can connect faster.

Skip connections with invalid certificates¶

If enabled, AdiIRC will disconnect servers with invalid ssl certificates.

Display invalid certificates for approval¶

If enabled AdiIRC will ask to approve servers with invalid ssl certificates.

Certificates¶

Automatically accept invalid certificates¶

If enabled, AdiIRC will connect to servers with invalid ssl certificates automatically.

Clear approved certificate cache¶

Clears previously accepted invalid certificates.

Client Certificate File¶

Path to a client ssl certificate in the pfx format