Server Options » History » Version 23
Per Amundsen, 04/22/2020 05:42 PM
1 | 1 | Per Amundsen | {{>toc}} |
---|---|---|---|
2 | |||
3 | h1. Server Options |
||
4 | |||
5 | 10 | Per Amundsen | h1. Server |
6 | 8 | Per Amundsen | |
7 | 1 | Per Amundsen | h2. Use new Serverlist |
8 | |||
9 | Enables or disables the new serverlist. |
||
10 | |||
11 | 14 | Per Amundsen | _Old and new [[Serverlist Dialog|Serverlist]] can still be accessed with the [[/serverlist]] command._ |
12 | 1 | Per Amundsen | |
13 | h2. Reconnect on server disconnect |
||
14 | |||
15 | if enabled, AdiIRC will try reconnect when remote connection is disconnected. |
||
16 | |||
17 | h2. Reconnect on resume from sleep |
||
18 | |||
19 | If enabled, AdiIRC will when resuming from sleep, try to reconnect all servers which was previously connected when going to sleep. |
||
20 | |||
21 | h2. Save open servers on exit and autoconnect them on next restart |
||
22 | |||
23 | 12 | Per Amundsen | If enabled, AdiIRC will on exit save all open servers in the serverlist and mark them for autoconnect on next startup. |
24 | 1 | Per Amundsen | |
25 | 14 | Per Amundsen | All other servers in the [[Serverlist Dialog|Serverlist]] will be unmarked for autoconnect. |
26 | 1 | Per Amundsen | |
27 | All autojoin channels for the open servers will be cleared and all open channels will be added as autojoin in their place. |
||
28 | 18 | Per Amundsen | |
29 | _A right-click menu "Save Channel" for [[Treebar_Control|Treebar]]/[[Switchbar_Control|Switchbar]] will be available to exclude/include channels from this system._ |
||
30 | 7 | Per Amundsen | |
31 | h2. Use echo-message when available |
||
32 | |||
33 | 23 | Per Amundsen | If enabled, AdiIRC will ask to enable ircv3 "echo-message":http://ircv3.net/specs/extensions/echo-message-3.2.html tag on supported servers, outgoing messages will be hidden so only the echo'ed message is shown. |
34 | 22 | Per Amundsen | |
35 | h2. Use STS when available |
||
36 | |||
37 | 23 | Per Amundsen | When enabled and connected to a server which supports the IRCv3 "STS":https://ircv3.net/specs/extensions/sts extension and not using "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security, AdiIRC will disconnect and reconnect using "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security. AdiIRC will continue to only connect to this server using "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security until the STS expires. |
38 | 1 | Per Amundsen | |
39 | 13 | Per Amundsen | h2. Disconnect on SASL login error |
40 | |||
41 | 1 | Per Amundsen | If Enabled, AdiIRC will disconnect from a server if "SASL":https://ircv3.net/specs/extensions/sasl-3.2.html login was enabled and the authentication failed or the "SASL":https://ircv3.net/specs/extensions/sasl-3.2.html module was removed. |
42 | |||
43 | 14 | Per Amundsen | h2. Always rejoin auto channel |
44 | |||
45 | If enabled, all channels in the [[Serverlist Dialog|Serverlist]] with *Autojoin* enabled will be (re)joined when the server is reconnected, otherwise only the currently open channels will be rejoined. |
||
46 | |||
47 | 20 | Per Amundsen | h2. Close channel/private windows on disconnect |
48 | |||
49 | If enabled, closes all associated channel/private windows when the server disconnects. |
||
50 | |||
51 | h2. Close Serverlist when clicking Connect |
||
52 | |||
53 | If enabled, the Serverlist will automatically close when you click the *Connect* or *Connect in a new tab* buttons in the Serverlist. |
||
54 | |||
55 | 1 | Per Amundsen | h2. Retry [X] times |
56 | |||
57 | Number of times to try to reconnect. |
||
58 | |||
59 | h2. Wait [X] seconds before retrying |
||
60 | |||
61 | Number of seconds to wait between each reconnect try. |
||
62 | |||
63 | h2. Default ban type |
||
64 | |||
65 | Default ban type to use when using [[/ban]]. |
||
66 | |||
67 | h2. Default Part Message |
||
68 | |||
69 | Default part message to use when using [[/part]] or closing a channel window. |
||
70 | |||
71 | h2. Default Quit message |
||
72 | |||
73 | Default quit message to use when using [[/quit]] or disconnecting/closing a server window. |
||
74 | |||
75 | 4 | Per Amundsen | _Default quit message will be ignored if random quit message is enabled._ |
76 | |||
77 | 1 | Per Amundsen | h2. Default Port |
78 | |||
79 | Default port used in [[/server]] and other places. |
||
80 | |||
81 | 11 | Per Amundsen | _+port can be used for "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security, *port can be used for "STARTTLS":https://wiki.inspircd.org/STARTTLS_Documentation._ |
82 | 1 | Per Amundsen | |
83 | h2. Use random quit message |
||
84 | |||
85 | 4 | Per Amundsen | If enabled, a random line from the quit messages file will be used. |
86 | 1 | Per Amundsen | |
87 | Quit message can be added/removed from the Menubar -> Tools -> Edit Quits. |
||
88 | 4 | Per Amundsen | |
89 | _Default quit message will be ignored._ |
||
90 | 1 | Per Amundsen | |
91 | h2. Default Encoding |
||
92 | |||
93 | Default character encoding to use when adding/connecting a new server. |
||
94 | |||
95 | h2. Use UTF8 Fallback |
||
96 | |||
97 | If enabled and encoding is not UTF8, AdiIRC will try to decode the text with the chosen encoding and if it fails, fallback to decode with UTF8 instead. |
||
98 | |||
99 | h2. Try to regain nick |
||
100 | |||
101 | If enabled, AdiIRC will automatically try to regain your primary nick. |
||
102 | |||
103 | h2. Use serverlist group labels as network name |
||
104 | |||
105 | 14 | Per Amundsen | If enabled, the [[Serverlist Dialog|Serverlist]] label you entered will be shown in Treebar/Switchbar/Titlebar etc instead of the network name received from the server. |
106 | 1 | Per Amundsen | |
107 | h2. Track users away status |
||
108 | |||
109 | If enabled, AdiIRC will periodically try to find out which users are away or not away. |
||
110 | |||
111 | h2. Only track away on channels smaller than [X] users |
||
112 | 2 | Per Amundsen | |
113 | Disable tracking away status for channels larger than [X] users. |
||
114 | |||
115 | On some servers, AdiIRC needs to send /who #channel periodically, doing this on large channels can cause the server to disconnect you. |
||
116 | |||
117 | h2. Send delay [X] ms |
||
118 | |||
119 | Set the delay in milliseconds between each message AdiIRC sends to the server. |
||
120 | |||
121 | Sending too much data too fast can cause the server to disconnect you. |
||
122 | |||
123 | 9 | Per Amundsen | h1. Identd |
124 | 8 | Per Amundsen | |
125 | 2 | Per Amundsen | h2. Use Identd |
126 | |||
127 | Enable or disable the "Identd":https://en.wikipedia.org/wiki/Ident_protocol server. |
||
128 | |||
129 | h2. Enable only when connecting |
||
130 | |||
131 | If enabled, AdiIRC will start the identd server when connecting to a server, and stop it when connected. |
||
132 | |||
133 | h2. Show Identd requests |
||
134 | |||
135 | 3 | Per Amundsen | If enables, shows a notice in the server window when a server wants to know your Identd nick. |
136 | 2 | Per Amundsen | |
137 | 19 | Per Amundsen | h2. Use username as ident nick |
138 | |||
139 | When enabled, identd will reply with the *Username* set in the [[Serverlist Dialog|Serverlist]] for this request, otherwise it will reply with the Identd nick. |
||
140 | |||
141 | If there are no connections matching the identd request, the Identd nick will be replied. |
||
142 | |||
143 | 2 | Per Amundsen | h2. Ident Nick |
144 | |||
145 | The nick to reply when a server asks for your Identd nick. |
||
146 | |||
147 | h2. System |
||
148 | |||
149 | The system to reply when a servers asks for your Identd nick. |
||
150 | |||
151 | h2. Ident Port |
||
152 | |||
153 | The port the Identd server should listen on. |
||
154 | |||
155 | 8 | Per Amundsen | h1. Dde |
156 | |||
157 | 2 | Per Amundsen | h2. Enable Dde Server |
158 | |||
159 | Enables or disables the "Dde":https://en.wikipedia.org/wiki/Dynamic_Data_Exchange Server. |
||
160 | |||
161 | h2. Check if Service Name is in use |
||
162 | |||
163 | If enables, AdiIRC will check if another Dde server is using the same name before starting it. |
||
164 | |||
165 | h2. Service Name |
||
166 | |||
167 | The Dde service name to use. |
||
168 | |||
169 | h2. Dde Delay [X] ms |
||
170 | |||
171 | How long to wait in milliseconds before giving up the Dde request. |
||
172 | |||
173 | 8 | Per Amundsen | h1. Upnp |
174 | |||
175 | h2. Ip address |
||
176 | |||
177 | If checked, opens the port specified in the [[/socklisten]] -p command using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play. |
||
178 | |||
179 | h2. DCC Connections |
||
180 | |||
181 | If checked, opens the port associated "DCC":https://en.wikipedia.org/wiki/Direct_Client-to-Client port using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play when sending files. |
||
182 | |||
183 | h2. Identd server |
||
184 | |||
185 | If checked, opens the identd port using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play. |
||
186 | |||
187 | _Some servers scans for open identd port and can take a while to timeout, with the port open AdiIRC can connect faster._ |
||
188 | |||
189 | 21 | Per Amundsen | h1. Certificates |
190 | |||
191 | 2 | Per Amundsen | h2. Skip connections with invalid certificates |
192 | |||
193 | If enabled, AdiIRC will disconnect servers with invalid ssl certificates. |
||
194 | |||
195 | h2. Display invalid certificates for approval |
||
196 | 8 | Per Amundsen | |
197 | If enabled AdiIRC will ask to approve servers with invalid ssl certificates. |
||
198 | 2 | Per Amundsen | |
199 | h2. Automatically accept invalid certificates |
||
200 | |||
201 | If enabled, AdiIRC will connect to servers with invalid ssl certificates automatically. |
||
202 | 1 | Per Amundsen | |
203 | h2. Clear approved certificate cache |
||
204 | |||
205 | Clears previously accepted invalid certificates. |
||
206 | 6 | Per Amundsen | |
207 | h2. Client Certificate File |
||
208 | |||
209 | Path to a client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx |
||
210 | 15 | Per Amundsen | |
211 | h2. Create new certificate |
||
212 | |||
213 | Generates a new client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx |
||
214 | |||
215 | 16 | Per Amundsen | _Only works on Windows 10+._ |
216 | |||
217 | 15 | Per Amundsen | [[Create New Certificate Dialog]] |