Server Options » History » Revision 19
Revision 18 (Per Amundsen, 06/17/2019 08:24 AM) → Revision 19/29 (Per Amundsen, 08/15/2019 01:24 PM)
{{>toc}}
h1. Server Options
h1. Server
h2. Use new Serverlist
Enables or disables the new serverlist.
_Old and new [[Serverlist Dialog|Serverlist]] can still be accessed with the [[/serverlist]] command._
h2. Reconnect on server disconnect
if enabled, AdiIRC will try reconnect when remote connection is disconnected.
h2. Reconnect on resume from sleep
If enabled, AdiIRC will when resuming from sleep, try to reconnect all servers which was previously connected when going to sleep.
h2. Save open servers on exit and autoconnect them on next restart
If enabled, AdiIRC will on exit save all open servers in the serverlist and mark them for autoconnect on next startup.
All other servers in the [[Serverlist Dialog|Serverlist]] will be unmarked for autoconnect.
All autojoin channels for the open servers will be cleared and all open channels will be added as autojoin in their place.
_A right-click menu "Save Channel" for [[Treebar_Control|Treebar]]/[[Switchbar_Control|Switchbar]] will be available to exclude/include channels from this system._
h2. Use echo-message when available
If enabled, AdiIRC will ask to enable ircv3 "echo-message":http://ircv3.net/specs/extensions/echo-message-3.2.html tag on supported servers, outgoing messages will be hidden so only the echo'ed message is shown.
h2. Disconnect on SASL login error
If Enabled, AdiIRC will disconnect from a server if "SASL":https://ircv3.net/specs/extensions/sasl-3.2.html login was enabled and the authentication failed or the "SASL":https://ircv3.net/specs/extensions/sasl-3.2.html module was removed.
h2. Always rejoin auto channel
If enabled, all channels in the [[Serverlist Dialog|Serverlist]] with *Autojoin* enabled will be (re)joined when the server is reconnected, otherwise only the currently open channels will be rejoined.
h2. Retry [X] times
Number of times to try to reconnect.
h2. Wait [X] seconds before retrying
Number of seconds to wait between each reconnect try.
h2. Default ban type
Default ban type to use when using [[/ban]].
h2. Default Part Message
Default part message to use when using [[/part]] or closing a channel window.
h2. Default Quit message
Default quit message to use when using [[/quit]] or disconnecting/closing a server window.
_Default quit message will be ignored if random quit message is enabled._
h2. Default Port
Default port used in [[/server]] and other places.
_+port can be used for "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security, *port can be used for "STARTTLS":https://wiki.inspircd.org/STARTTLS_Documentation._
h2. Use random quit message
If enabled, a random line from the quit messages file will be used.
Quit message can be added/removed from the Menubar -> Tools -> Edit Quits.
_Default quit message will be ignored._
h2. Default Encoding
Default character encoding to use when adding/connecting a new server.
h2. Use UTF8 Fallback
If enabled and encoding is not UTF8, AdiIRC will try to decode the text with the chosen encoding and if it fails, fallback to decode with UTF8 instead.
h2. Try to regain nick
If enabled, AdiIRC will automatically try to regain your primary nick.
h2. Use serverlist group labels as network name
If enabled, the [[Serverlist Dialog|Serverlist]] label you entered will be shown in Treebar/Switchbar/Titlebar etc instead of the network name received from the server.
h2. Track users away status
If enabled, AdiIRC will periodically try to find out which users are away or not away.
h2. Only track away on channels smaller than [X] users
Disable tracking away status for channels larger than [X] users.
On some servers, AdiIRC needs to send /who #channel periodically, doing this on large channels can cause the server to disconnect you.
h2. Send delay [X] ms
Set the delay in milliseconds between each message AdiIRC sends to the server.
Sending too much data too fast can cause the server to disconnect you.
h1. Identd
h2. Use Identd
Enable or disable the "Identd":https://en.wikipedia.org/wiki/Ident_protocol server.
h2. Enable only when connecting
If enabled, AdiIRC will start the identd server when connecting to a server, and stop it when connected.
h2. Show Identd requests
If enables, shows a notice in the server window when a server wants to know your Identd nick.
h2. Use username as ident nick
When enabled, identd will reply with the *Username* set in the [[Serverlist Dialog|Serverlist]] for this request, otherwise it will reply with the Identd nick.
If there are no connections matching the identd request, the Identd nick will be replied.
h2. Ident Nick
The nick to reply when a server asks for your Identd nick.
h2. System
The system to reply when a servers asks for your Identd nick.
h2. Ident Port
The port the Identd server should listen on.
h1. Dde
h2. Enable Dde Server
Enables or disables the "Dde":https://en.wikipedia.org/wiki/Dynamic_Data_Exchange Server.
h2. Check if Service Name is in use
If enables, AdiIRC will check if another Dde server is using the same name before starting it.
h2. Service Name
The Dde service name to use.
h2. Dde Delay [X] ms
How long to wait in milliseconds before giving up the Dde request.
h1. Upnp
h2. Ip address
If checked, opens the port specified in the [[/socklisten]] -p command using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play.
h2. DCC Connections
If checked, opens the port associated "DCC":https://en.wikipedia.org/wiki/Direct_Client-to-Client port using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play when sending files.
h2. Identd server
If checked, opens the identd port using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play.
_Some servers scans for open identd port and can take a while to timeout, with the port open AdiIRC can connect faster._
h2. Skip connections with invalid certificates
If enabled, AdiIRC will disconnect servers with invalid ssl certificates.
h2. Display invalid certificates for approval
If enabled AdiIRC will ask to approve servers with invalid ssl certificates.
h1. Certificates
h2. Automatically accept invalid certificates
If enabled, AdiIRC will connect to servers with invalid ssl certificates automatically.
h2. Clear approved certificate cache
Clears previously accepted invalid certificates.
h2. Client Certificate File
Path to a client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx
h2. Create new certificate
Generates a new client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx
_Only works on Windows 10+._
[[Create New Certificate Dialog]]