Scid » History » Version 5
Per Amundsen, 02/23/2023 07:34 PM
1 | 1 | Per Amundsen | _Added in 1.9.0_ |
---|---|---|---|
2 | |||
3 | */scid [-arstN] <N> [command]* |
||
4 | |||
5 | Changes the active connection for a script to connection id N, where N is a $cid value. |
||
6 | All commands after the /scid command will be performed on the new connection id. |
||
7 | If you specify the command parameter, the connection id is set only for that command. |
||
8 | |||
9 | 5 | Per Amundsen | _See also [[/scon]], [[$scon]], [[$scid]]._ |
10 | |||
11 | 1 | Per Amundsen | *Switches* |
12 | |||
13 | 4 | Per Amundsen | table(ktable). |
14 | |*Switch*|*Description*| |
||
15 | | -a | Perform the command on all connection id's. | |
||
16 | | -r | Resets the connection to the original id. | |
||
17 | | -s | makes any called commands or identifiers show their results. | |
||
18 | | -tN | limits the command to being performed only on servers with a certain connection status, where N is an or'd value of 1 = server connected, 2 = not connected, 4 = connecting, 8 = not connecting. | |
||
19 | 1 | Per Amundsen | |
20 | *Parameters* |
||
21 | |||
22 | 4 | Per Amundsen | table(ktable). |
23 | |*Parameter*|*Description*| |
||
24 | | <N> | The connection id. | |
||
25 | | [command] | Command to execute on the connection. | |