ZNC » History » Revision 13
Revision 12 (Ken Spencer, 09/05/2016 04:28 AM) → Revision 13/21 (Ken Spencer, 09/05/2016 05:03 AM)
{{>toc}}
h1. ZNC
To connect to a "ZNC":http://wiki.znc.in/ZNC server through *AdiIRC* is very easy. Follow the examples bellow:
h2. Adding a ZNC Server by using the Server Manager
To open the Server Manager press *ctrl + s* or go to Menu *Server* -> *Server List*.
!AdiIRC_Server_List.png!
This is what you should see if you haven't added any in.
h3. Adding a Network
Once you have the server list up, you're going to click 'Add new network'
!AdiIRC_Add_Network_Button.png!
You should then have a dialog box come up that looks like
!AdiIRC_Blank_Network.png!
Type the network name that you are connecting to, or any name is fine, just as long as you remember it.
!AdiIRC_New_Blank_Network.png!
In this dialog you have the usual IRC settings, and you may fill them as you like, but the ones that must be valid are Password and Username on the left side. Now, before you go saving that and adding servers, you for to make sure you will be authenticating correctly. In the same window, you should see the drop down menu labeled login method.
!AdiIRC_Use_PASS.png!
From this dialog you will need to select 'Server Password (/PASS password)' as shown.
!AdiIRC_Server_Tab.png!
From here you need to click 'Add' on the right.
!AdiIRC_Server_Tab_Entry.png!
Once done, you should see a dialog looking like the one above. For this, you'd input a 'HostName', 'Ports', and check 'Enable SSL'.
After that, you're done with that window. *This newer tutorial is under construction*
*And with that, you should be able When connected to use the 'Connect' Button and a server your address will be able to connect to your BNC/ZNC Account* something like: *field1* is *field3*@host (*field4*) / *nick* is *user*@my.isp.host (*realname*)
h2. Connecting by direct command
Check the [[/server]] wiki for a complete overview of command parameters. Two quick example:
# *Non SSL*: <pre>/server -m you.znc.net:5708 -p login:password</pre>
# *SSL*: <pre>/server -m you.znc.net:+5708 -p login:password</pre>
To connect using *SSL*, add *<notextile>+</notextile>* to port prefix or use the parameter *-ssl*.
Ps: for no specified parameters like nick (*-i*), username (*-u*), realname (*-r*), etc, *AdiIRC* will use the default values set in [[/quickconnect]].
h2. Connecting by script
<pre>on *:start: {
server you.znc.net:5708 -p login:password
}</pre>