Project

General

Profile

Actions

Hash Tables

/hmake

Added in 1.9.0

/hmake [-s] <name> <N>

Creates a new hash table with N slots.

See also /hsave, /hload, /hfree, /hadd, /hdel, $hget, $hfind.

Switches

Switch Description
-s Displays a creation result.

Parameters

Parameter Description
<name> The hashtable name to create.
<N> The initial number of hashtable items.

Example

; call the setup once
; /example
;
; //echo -a $abbr(lol)
;
alias example {
  ;Create the table.
  /hmake abbr 1000

  ;Populate the table.
  /hadd abbr lol laughing out load
  /hadd abbr omg oh my gosh
  /hadd abbr lmao laughing my a?? off
  /hadd abbr brb be right back
}
; get the abbreviation
alias abbr return $hget(abbr, $1)

/hfree

Added in 1.9.0

/hfree [-sw] <name>

Deletes a hash table.

See also /hsave, /hsave, /hmake, /hadd, /hdel, $hget, $hfind.

Switches

Switch Description
-s Displays the result.
-w Indicates name is a wildcard.

Parameters

Parameter Description
<name> The hashtable to delete.

Example

alias example {
  ;Create the hash table 'hash'.
  /hmake hash

  ;Print the hashtable size.
  echo -a $hget(hash) : $hget(hash).size

  ;Creates the hash table 'h' with 10 items.
  /hmake h 10

  ;Creates the hash table 'has' with 20 items.
  /hmake has 20

  ;Delete hash table 'hash'.
  /hfree -s hash

  ;Print the hashtable size.
  /echo -a $hget(h) : $hget(h).size - $hget(has) : $hget(has).size

  ;Deletes any hash tables matching h*
  /hfree -sw h*
}

/hadd

Added in 1.9.0

/hadd [-bcmsuNz] <name> <item> [text | &binvar]

Adds an item to an existing hash table.

See also /hsave, /hload, /hmake, /hfree, /hdel, $hget, $hfind.

Switches

Switch Description
-b Indicates &binvar is set.
-c Chop the &binvar to first null byte.
-m Creates the table if it does not exist.
-s Displays the result.
-uN Unset the item after N seconds.
-z Decreases the item once per second until it reaches zero and then unsets it.

Parameters

Parameter Description
<name> The hash table to add to.
<item> The hash table item to add to.
[text | &binvar] The text or &binvar value to add.

Example

; call the setup once
; /abbr_setup
;
; //echo -a $abbr(lol)
;
alias abbr_setup {
  ;Populate the table, create it if it does not exist.
  hadd -m abbr lol laughing out load
  hadd abbr omg oh my gosh
  hadd abbr lmao laughing my a?? off
  hadd abbr brb be right back
}

;Get the abbreviation.
alias abbr return $hget(abbr, $1)

/hdel

Added in 1.9.0

/hdel [-sw] <name> <item>

Deletes an item from a hash table.

See also /hsave, /hload, /hmake, /hfree, $hget, $hfind.

Switches

Switch Description
-s Displays the result.
-w Indicates item is a wildcard.

Parameters

Parameter Description
<name> The hashtable to delete from.
<item> The hashtable item to delete.

Example

alias example {
  ; Create a hash table
  /hadd -m example academic a

   ; Add some items to the hash table..
  /hadd example academy a
  /hadd example accelerate a
  /hadd example accelerator a
  /hadd example accept a
  /hadd example access a
  /hadd example accident a
  /hadd example because b

  ; Print number of items.
  //echo -a $hget(example, 0).item

  ; Remove everything matching wildcard 'a*'.
  /hdel -w example a*

  ; Print number of items.
  //echo -a $hget(example, 0).item

  ; Free table.
  /hfree example
}

/hload

Added in 1.9.0

/hload [-bBins] <name> <filename> [section]

Loads a table from a file.

See also /hsave, /hmake, /hfree, /hadd, /hdel, $hget, $hfind.

Switches

Switch Description
-b Loads binary files. $cr and $lf are preserved when saving as binary files. Ignored if -i switch used.
-B Uses a larger index than -b to allow longer binary data to be saved. This is not compatible with files created by the -b switch.
-i Treats the file as an ini file. You can specify an optional section name after the filename.
-n Load file as data only, with no items. When loading with -n each line of data is assigned an N item value, starting at N = 1.
-m Creates the table if it does not exist. (AdiIRC only)
-s Displays the result.

Parameters

Parameter Description
<name> The hashtable to load into.
<filename> The filename of the saved hashtable to load.
[section] Hashtable file section to load.

/hsave

Added in 1.9.0

/hsave [-abBinsu] <name> <filename> [section]

Saves a hash table to a file.

See also /hload, /hmake, /hfree, /hadd, /hdel, $hget, $hfind.

Switches

Switch Description
-s Displays the result.
-b Saves binary files. $cr and $lf are preserved when saving as binary files. Ignored if -i switch used.
-B Uses a larger index than -b to allow longer binary data to be saved. This is not compatible with files created by the -b switch.
-i Treats the file as an ini file. You can specify an optional section name after the filename.
-n Load file as data only, with no items. When loading with -n each line of data is assigned an N item value, starting at N = 1.
-a Appends to an existing file instead of overwriting it.
-u Includes unset items.

Parameters

Parameter Description
<name> The hash table to save.
<filename> The filename to save to.
[section] Section of ini tile to save to. (used witth -i)

/hdec

Added in 1.9.0

/hdec [-bcmsuNzB] <name> <item> [num | &binvar]

Decreases the value of the item by 'num'.

Switches

Switch Description
-b Indicates &binvar is set.
-c Chop the &binvar to first null byte.
-m Creates the table if it does not exist.
-s Displays the result.
-uN Unset the the item after N seconds.
-z Decreases the item once per second until it reaches zero and then unsets it.
-B Performs a $calcint calculation instead of regular $calc when arithmetic operators are used. (AdiIRC only)

Parameters

Parameter Description
<name> The hashtable where the item resides.
<item> The hashtable item to decrease.
[num | &binvar] The number or &binvar to decrease by.

Example

alias countdown {
  ;Adds the item down with a value of 10 to the table count.
  hadd -m count down 10

  echo -a $hget(count,down) $+ !
  :repeat

  ;Checks if the value of down returns true.
  if ($hget(count,down) > 1) {
    ;decreases down by 1
    hdec count down
    ;echos the current count
    echo -a $hget(count,down) $+ !
    ;repeats
    goto repeat
  }
  ;If the previous if statement returns false it carries on with this.
  else echo -a 0, Hurray!
  hfree -s count
}

/hinc

Added in 1.9.0

/hinc [-bcmsuNzB] <name> <item> [num | &binvar]

Increases the value of the item by 'num'.

Switches

Switch Description
-b Indicates &binvar is set.
-c Chop the &binvar to first null byte.
-m Creates the table if it does not exist.
-s Displays the result.
-uN Unsets the item after N seconds.
-z Decreases the item once per second until it reaches zero and then unsets it.
-B Performs a $calcint calculation instead of regular $calc when arithmetic operators are used. (AdiIRC only)

Parameters

Parameter Description
<name> The hashtable where the <item> is stored.
<item> The hashtable item to increase.
[num | &binvar] The number or &binvar to increase by.

Example

alias example {
  ;Create a hashtable.
  /hmake -s example

  ;Add a few items.
  /hadd example item1 4
  /hadd example item2 7
  /hadd example item3 9

  ;Print the items.
  /echo -a item1 = $hget(example, item1)
  /echo -a item2 = $hget(example, item2)
  /echo -a item3 = $hget(example, item3)

  ;Increase the values.
  /hinc example item1 5
  /hinc example item2 12
  /hinc example item3 1

  /echo -e -

  ;Print the items.
  /echo -a item1 = $hget(example, item1)
  /echo -a item2 = $hget(example, item2)
  /echo -a item3 = $hget(example, item3)

  ;Cleanup.
  /hfree -s example
}

$hget

Added in 1.9.4

$hash(text, B)

Returns a hash number based on text where B is the number of bits to use when calculating the hash number.

Parameters
Added in 1.9.0

table(ktable). |*Parameter*|*Description*|
$hget(name|N)

Returns name of a hash table if it exists, or returns the name of the Nth hash table.

See also /hsave, /hload, /hmake, /hfree, /hdel, $hfind.

Parameters

Parameter Description
name|N Name of the hashtable or If N = 0, number of hashtables, otherwise the Nth hashtable name.

Properties

Property Description
.size Returns the size of the hashtable as specified in /hmake.

Example

; Create a hashtable.
/hmake Example

; Print number of hashtables.
//echo -ag $hget(0)

; Print name and size of the first hashtable.
//echo -ag $hget(1) - $hget(1).size

$hget(name|N, item|N, [&binvar])

Returns the data associated with an item in the specified hash table.

Parameters

Parameter Description
name|N Name of the hashtable or the Nth hashtable name.
item|N Name of the item or if N = 0 number of items, otherwise the Nth item.
[&binvar] Assigns the contents of the item to a &binvar. (optional)

Properties

Property Description
.data Returns the item value.
.item Returns the item name.
.unset Returns number of seconds before the item is automatically removed (if set).
.hash TODO
.state TODO

Example

; Create a hashtable
/hmake Example

; Add a item to the hashtable
/hadd Example ExampleItem ExampleValue

; Print number of items in the hastable.
//echo -ag $hget(Example, 0)

; Print information about the first item in the hashtable.
//echo -ag Name is $hget(Example, 1).item Value is $hget(Example, 1).data Unset at $hget(Example, 1).unset

table(ktable). |*Parameter*|*Description*| | text | Text to hash. | | B | Number of bits to use. (min 2, max 32) |

$hfind

Added in 1.9.0

$hfind(name|N,text,[N],[options],[@window|command])

Searches table for the Nth item name which matches text and returns the item name.

See also /hsave, /hload, /hmake, /hfree, /hdel, $hget.

See also $hmatch, $hregex.

Parameters

Parameter Description
name|N Name of the hash table or the Nth hash table.
text Text to search for.
[N] If N = 0, number of matches, otherwise the Nth match. (optional)
[options] Options.
[@window|command] if @window is defined, fills the side-listbox with the results, otherwise the command is run on each result.

Options

Option Description
n Normal text comparison. (default if M is not specified)
w Text is wildcard text.
W Hash table item/data is wildcard text.
r Text is a regular expression.
R Hash table item/data is a regular expression.
N Use case-sensitive match. (AdiIRC only)
H /halt will halt the running script if used inside the [command]. (AdiIRC only)

Properties

Property Description
.data Search for a matching data value instead of item name.

Example

; Searches hash table 'Example' for all items using and runs the command 'echo -ag $1-' on each result, $1- holds the item name or data.
//echo -ag result: $hfind(Example, *, 0, w, echo -ag $1-)

; Searches the hash table 'Example' and prints the number of matches.
//echo -ag result: $hfind(Example, *, 0, w)

; Searches the hash table 'Example' and prints the first matched item.
//echo -ag result: $hfind(Example, *, 1, w)

; Searches the hash table 'Example' and prints the first matched data.
//echo -ag result: $hfind(Example, *, 1, w).data

$hmatch

Added in 2.0

$hmatch(name|N,text,[N])

Searches table for the Nth item name which matches text using a wildcard pattern and returns the item name.

See also /hsave, /hload, /hmake, /hfree, /hdel, $hget.

See also $hfind, $hregex.

Parameters

Parameter Description
name|N Name of the hash table or the Nth hash table.
text Text to search for.
[N] If N = 0, number of matches, otherwise the Nth match. (optional)

Properties

Property Description
.data Search for a matching data value instead of item name.

Example

; Searches the hash table 'Example' and prints the number of matches.
//echo -ag result: $hmatch(Example, *, 0)

; Searches the hash table 'Example' and prints the first matched item.
//echo -ag result: $hmatch(Example, *, 1)

; Searches the hash table 'Example' and prints the first matched data.
//echo -ag result: $hmatch(Example, *, 1).data

Updated by Per Amundsen over 7 years ago · 2 revisions

Also available in: PDF HTML TXT