Project

General

Profile

Server Options » History » Version 27

Per Amundsen, 03/27/2021 05:37 PM

1 1 Per Amundsen
{{>toc}}
2
3
h1. Server Options
4
5 10 Per Amundsen
h1. Server
6 8 Per Amundsen
7 1 Per Amundsen
h2. Use new Serverlist
8
9
Enables or disables the new serverlist.
10
11 14 Per Amundsen
_Old and new [[Serverlist Dialog|Serverlist]] can still be accessed with the [[/serverlist]] command._
12 1 Per Amundsen
13
h2. Reconnect on server disconnect
14
15
if enabled, AdiIRC will try reconnect when remote connection is disconnected.
16
17
h2. Reconnect on resume from sleep
18
19
If enabled, AdiIRC will when resuming from sleep, try to reconnect all servers which was previously connected when going to sleep.
20
21
h2. Save open servers on exit and autoconnect them on next restart
22
23 12 Per Amundsen
If enabled, AdiIRC will on exit save all open servers in the serverlist and mark them for autoconnect on next startup.
24 1 Per Amundsen
25 14 Per Amundsen
All other servers in the [[Serverlist Dialog|Serverlist]] will be unmarked for autoconnect.
26 1 Per Amundsen
27
All autojoin channels for the open servers will be cleared and all open channels will be added as autojoin in their place.
28 18 Per Amundsen
29
_A right-click menu "Save Channel" for [[Treebar_Control|Treebar]]/[[Switchbar_Control|Switchbar]] will be available to exclude/include channels from this system._
30 7 Per Amundsen
31
h2. Use echo-message when available
32
33 24 Per Amundsen
If enabled, AdiIRC will ask to enable "IRCv3":http://ircv3.net "echo-message":http://ircv3.net/specs/extensions/echo-message-3.2.html tag on supported servers, outgoing messages will be hidden so only the echo'ed message is shown.
34 22 Per Amundsen
35
h2. Use STS when available
36
37 24 Per Amundsen
When enabled and connected to a server which supports the "IRCv3":http://ircv3.net "STS":https://ircv3.net/specs/extensions/sts extension and not using "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security, AdiIRC will disconnect and reconnect using "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security. AdiIRC will continue to only connect to this server using "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security until the STS expires.
38 1 Per Amundsen
39 13 Per Amundsen
h2. Disconnect on SASL login error
40
41 1 Per Amundsen
If Enabled, AdiIRC will disconnect from a server if "SASL":https://ircv3.net/specs/extensions/sasl-3.2.html login was enabled and the authentication failed or the "SASL":https://ircv3.net/specs/extensions/sasl-3.2.html module was removed.
42
43 14 Per Amundsen
h2. Always rejoin auto channel
44
45
If enabled, all channels in the [[Serverlist Dialog|Serverlist]] with *Autojoin* enabled will be (re)joined when the server is reconnected, otherwise only the currently open channels will be rejoined.
46
47 20 Per Amundsen
h2. Close channel/private windows on disconnect
48
49
If enabled, closes all associated channel/private windows when the server disconnects.
50
51
h2. Close Serverlist when clicking Connect
52
53
If enabled, the Serverlist will automatically close when you click the *Connect* or *Connect in a new tab* buttons in the Serverlist.
54
55 1 Per Amundsen
h2. Retry [X] times
56
57
Number of times to try to reconnect.
58
59
h2. Wait [X] seconds before retrying
60
61
Number of seconds to wait between each reconnect try.
62
63
h2. Default ban type
64
65
Default ban type to use when using [[/ban]].
66
67
h2. Default Part Message
68
69
Default part message to use when using [[/part]] or closing a channel window.
70
71
h2. Default Quit message
72
73
Default quit message to use when using [[/quit]] or disconnecting/closing a server window.
74
75 4 Per Amundsen
_Default quit message will be ignored if random quit message is enabled._
76
77 1 Per Amundsen
h2. Default Port
78
79
Default port used in [[/server]] and other places.
80
81 11 Per Amundsen
_+port can be used for "SSL/TLS":https://en.wikipedia.org/wiki/Transport_Layer_Security, *port can be used for "STARTTLS":https://wiki.inspircd.org/STARTTLS_Documentation._
82 1 Per Amundsen
83
h2. Use random quit message
84
85 4 Per Amundsen
If enabled, a random line from the quit messages file will be used.
86 1 Per Amundsen
87 26 Per Amundsen
Quit message can be added/removed from the [[Menubar_Control|Menubar]] -> Tools -> Edit Quits.
88 4 Per Amundsen
89
_Default quit message will be ignored._
90 1 Per Amundsen
91
h2. Default Encoding
92
93
Default character encoding to use when adding/connecting a new server.
94
95
h2. Use UTF8 Fallback
96
97
If enabled and encoding is not UTF8, AdiIRC will try to decode the text with the chosen encoding and if it fails, fallback to decode with UTF8 instead.
98
99
h2. Try to regain nick
100
101
If enabled, AdiIRC will automatically try to regain your primary nick.
102
103
h2. Use serverlist group labels as network name
104
105 27 Per Amundsen
If enabled, the [[Serverlist Dialog|Serverlist]] label you entered will be shown in [[Treebar_Control|Treebar]]/[[Switchbar_Control|Switchbar]]/[[Titlebar Control|Titlebar]] etc instead of the network name received from the server.
106 1 Per Amundsen
107
h2. Track users away status
108
109
If enabled, AdiIRC will periodically try to find out which users are away or not away.
110
111
h2. Only track away on channels smaller than [X] users
112 2 Per Amundsen
113
Disable tracking away status for channels larger than [X] users.
114
115
On some servers, AdiIRC needs to send /who #channel periodically, doing this on large channels can cause the server to disconnect you.
116
117
h2. Send delay [X] ms
118
119
Set the delay in milliseconds between each message AdiIRC sends to the server.
120
121
Sending too much data too fast can cause the server to disconnect you.
122
123 9 Per Amundsen
h1. Identd
124 8 Per Amundsen
125 2 Per Amundsen
h2. Use Identd
126
127
Enable or disable the "Identd":https://en.wikipedia.org/wiki/Ident_protocol server.
128
129
h2. Enable only when connecting
130
131
If enabled, AdiIRC will start the identd server when connecting to a server, and stop it when connected.
132
133
h2. Show Identd requests
134
135 3 Per Amundsen
If enables, shows a notice in the server window when a server wants to know your Identd nick.
136 2 Per Amundsen
137 19 Per Amundsen
h2. Use username as ident nick
138
139
When enabled, identd will reply with the *Username* set in the [[Serverlist Dialog|Serverlist]] for this request, otherwise it will reply with the Identd nick.
140
141
If there are no connections matching the identd request, the Identd nick will be replied.
142
143 2 Per Amundsen
h2. Ident Nick
144
145
The nick to reply when a server asks for your Identd nick.
146
147
h2. System
148
149
The system to reply when a servers asks for your Identd nick.
150
151
h2. Ident Port
152
153
The port the Identd server should listen on.
154
155 8 Per Amundsen
h1. Dde
156
157 2 Per Amundsen
h2. Enable Dde Server
158
159
Enables or disables the "Dde":https://en.wikipedia.org/wiki/Dynamic_Data_Exchange Server.
160
161
h2. Check if Service Name is in use
162
163
If enables, AdiIRC will check if another Dde server is using the same name before starting it.
164
165
h2. Service Name
166
167
The Dde service name to use.
168
169
h2. Dde Delay [X] ms
170
171
How long to wait in milliseconds before giving up the Dde request.
172
173 8 Per Amundsen
h1. Upnp
174
175
h2. Ip address
176
177
If checked, opens the port specified in the [[/socklisten]] -p command using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play.
178
179
h2. DCC Connections
180
181
If checked, opens the port associated "DCC":https://en.wikipedia.org/wiki/Direct_Client-to-Client port using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play when sending files.
182
183
h2. Identd server
184
185
If checked, opens the identd port using "Upnp":https://en.wikipedia.org/wiki/Universal_Plug_and_Play.
186
187
_Some servers scans for open identd port and can take a while to timeout, with the port open AdiIRC can connect faster._
188
189 21 Per Amundsen
h1. Certificates
190
191 2 Per Amundsen
h2. Skip connections with invalid certificates
192
193
If enabled, AdiIRC will disconnect servers with invalid ssl certificates.
194
195
h2. Display invalid certificates for approval
196 8 Per Amundsen
197
If enabled AdiIRC will ask to approve servers with invalid ssl certificates.
198 2 Per Amundsen
199
h2. Automatically accept invalid certificates
200
201
If enabled, AdiIRC will connect to servers with invalid ssl certificates automatically.
202 1 Per Amundsen
203
h2. Clear approved certificate cache
204
205
Clears previously accepted invalid certificates.
206 6 Per Amundsen
207
h2. Client Certificate File
208
209
Path to a client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx
210 15 Per Amundsen
211
h2. Create new certificate
212
213
Generates a new client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx
214
215 16 Per Amundsen
_Only works on Windows 10+._
216
217 15 Per Amundsen
[[Create New Certificate Dialog]]