AdiIRC

{{>toc}}

h1. Server Options

h2. Use new Serverlist

Enables or disables the new serverlist.

_Old and new serverlist can still be accessed with the [[/serverlist]] command._

h2. Reconnect on server disconnect

if enabled, AdiIRC will try reconnect when remote connection is disconnected.

h2. Reconnect on resume from sleep

If enabled, AdiIRC will when resuming from sleep, try to reconnect all servers which was previously connected when going to sleep.

h2. Save open servers on exit and autoconnect them on next restart

If enabled, AdiIRC will on exit save all open servers in the serverlist and mark them for autuconnect on next startup.

All other servers in the serverlist will be unmarked for autoconnect.

All autojoin channels for the open servers will be cleared and all open channels will be added as autojoin in their place.

h2. Use echo-message when available

If enabled, AdiIRC will ask to enable ircv3 "echo-message":http://ircv3.net/specs/extensions/echo-message-3.2.html tag on supported servers, outgoing messages will be hidden so only the echo'ed message is shown.

h2. Retry [X] times

Number of times to try to reconnect.

h2. Wait [X] seconds before retrying

Number of seconds to wait between each reconnect try.

h2. Default ban type

Default ban type to use when using [[/ban]].

h2. Default Part Message

Default part message to use when using [[/part]] or closing a channel window.

h2. Default Quit message

Default quit message to use when using [[/quit]] or disconnecting/closing a server window.

_Default quit message will be ignored if random quit message is enabled._

h2. Default Port

Default port used in [[/server]] and other places.

_+port can be used for [[SSL]], *port can be used for [[STARTTLS]]._

h2. Use random quit message

If enabled, a random line from the quit messages file will be used.

Quit message can be added/removed from the Menubar -> Tools -> Edit Quits.

_Default quit message will be ignored._

h2. Default Encoding

Default character encoding to use when adding/connecting a new server.

h2. Use UTF8 Fallback

If enabled and encoding is not UTF8, AdiIRC will try to decode the text with the chosen encoding and if it fails, fallback to decode with UTF8 instead.

h2. Try to regain nick

If enabled, AdiIRC will automatically try to regain your primary nick.

h2. Use serverlist group labels as network name

If enabled, the serverlist label you entered will be shown in Treebar/Switchbar/Titlebar etc instead of the network name received from the server.

h2. Track users away status

If enabled, AdiIRC will periodically try to find out which users are away or not away.

h2. Only track away on channels smaller than [X] users

Disable tracking away status for channels larger than [X] users.

On some servers, AdiIRC needs to send /who #channel periodically, doing this on large channels can cause the server to disconnect you.

h2. Send delay [X] ms

Set the delay in milliseconds between each message AdiIRC sends to the server.

Sending too much data too fast can cause the server to disconnect you.

h2. Use Identd

Enable or disable the "Identd":https://en.wikipedia.org/wiki/Ident_protocol server.

h2. Enable only when connecting

If enabled, AdiIRC will start the identd server when connecting to a server, and stop it when connected.

h2. Show Identd requests

If enables, shows a notice in the server window when a server wants to know your Identd nick.

h2. Ident Nick

The nick to reply when a server asks for your Identd nick.

h2. System

The system to reply when a servers asks for your Identd nick.

h2. Ident Port

The port the Identd server should listen on.

h2. Enable Dde Server

Enables or disables the "Dde":https://en.wikipedia.org/wiki/Dynamic_Data_Exchange Server.

h2. Check if Service Name is in use

If enables, AdiIRC will check if another Dde server is using the same name before starting it.

h2. Service Name

The Dde service name to use.

h2. Dde Delay [X] ms

How long to wait in milliseconds before giving up the Dde request.

h2. Skip connections with invalid certificates

If enabled, AdiIRC will disconnect servers with invalid ssl certificates.

h2. Display invalid certificates for approval

If enabled AdiIRC will ask to approve servers with invalid ssl certificates.

h2. Automatically accept invalid certificates

If enabled, AdiIRC will connect to servers with invalid ssl certificates automatically.

h2. Clear approved certificate cache

Clears previously accepted invalid certificates.

h2. Client Certificate File

Path to a client ssl certificate in the "pfx format":https://msdn.microsoft.com/en-us/library/windows/hardware/ff549703%28v=vs.85%29.aspx