Actions
Added in 3.1
/aop [-lrw] <on|off|nick|address> [#channel1,#channel2,...] [type] [network]
Add/remove/list users from the auto-op list.
/aop with no parameters shows current auto-op status.
See also $auto, $aop, $avoice, /avoice, $protect, /protect.
Switches
| Switch | Description |
| -l | Prints all auto-op users. |
| -r | Removes a address from the auto-op list. (if no address is specified, clears the auto-op list) |
| -w | Indicate the auto-op should be enabled on all networks. |
Parameters
| Parameter | Description |
| on | Turns auto-op on. |
| off | Turns auto-op off. |
| address | The address or nick to add/remove from the auto-op list. |
| [#channel1,#channel2,...] | List of channels to auto-op in. |
| [type] | A number representing a $mask to use. (if user is not found in the internal address list, a lookup is performed) |
| [network] | The network to auto-op in. |
Example
; Adds 'nick!nick@42.42.42.42' to the auto-op list on the channel '#channel' /aop nick!nick@42.42.42.42 #channel ; Adds 'nick!*@*' to the auto-op on any channel. /aop nick ; Remove 'nick!nick@42.42.42.42' from the auto-op. /aop -r nick!nick@42.42.42.42
Updated by Per Amundsen about 1 year ago · 10 revisions