Project

General

Profile

Actions

Avoice » History » Revision 2

« Previous | Revision 2/4 (diff) | Next »
Per Amundsen, 02/04/2020 09:03 PM


Added in 3.1

/avoice [-lrw] <on|off|nick|address> [#channel1,#channel2,...] [type] [network]

Add/remove/list users from the auto-voice list.

/avoice with no parameters shows $true if auto-op is enabled, otherwise $false.

If you do not specify a type then only the users nickname is used. If you specify a type then the users address is looked up via the server.

Switches

-l - Prints all auto-voice users.
-r - Removes a address from the auto-voice list. (if no address is specified, clears the auto-voice list)
-w - Indicate the auto-voice should be enabled on all networks.

Parameters

on - Turns auto-voice on.
off - Turns auto-voice off.
address - The address or nick to add/remove from the auto-voice list.
[#channel1,#channel2,...] - List of channels to auto-voice in.
[type] - A number representing a $mask to use. (if user is not found in the internal address list, a lookup is performed)
[network] - The network to auto-voice in.

Example

; Adds 'nick!nick@42.42.42.42' to the auto-voice list on the channel '#channel'
/avoice nick!nick@42.42.42.42 #channel

; Adds 'nick!*@*' to the auto-voice on any channel.
/avoice nick

; Remove 'nick!nick@42.42.42.42' from the auto-voice.
/avoice -r nick!nick@42.42.42.42

Updated by Per Amundsen about 4 years ago · 2 revisions

Also available in: PDF HTML TXT