Avoice » History » Revision 3
« Previous |
Revision 3/4
(diff)
| Next »
Per Amundsen, 02/04/2020 10:06 PM
Added in 3.1
/avoice [-lrw] <on|off|nick|address> [#channel1,#channel2,...] [type] [network]
Add/remove/list users from the auto-voice list.
/avoice with no parameters shows $true if auto-op is enabled, otherwise $false.
See also $aop, /aop, /protect, $protect.
Switches
-l - Prints all auto-voice users.
-r - Removes a address from the auto-voice list. (if no address is specified, clears the auto-voice list)
-w - Indicate the auto-voice should be enabled on all networks.
Parameters
on - Turns auto-voice on.
off - Turns auto-voice off.
address - The address or nick to add/remove from the auto-voice list.
[#channel1,#channel2,...] - List of channels to auto-voice in.
[type] - A number representing a $mask to use. (if user is not found in the internal address list, a lookup is performed)
[network] - The network to auto-voice in.
Example
; Adds 'nick!nick@42.42.42.42' to the auto-voice list on the channel '#channel' /avoice nick!nick@42.42.42.42 #channel ; Adds 'nick!*@*' to the auto-voice on any channel. /avoice nick ; Remove 'nick!nick@42.42.42.42' from the auto-voice. /avoice -r nick!nick@42.42.42.42
Updated by Per Amundsen almost 5 years ago · 3 revisions